Sublime Text 2 文件设置详解

使用英文版的Sublime Text 2，还真是麻烦，之前想设置什么都是直接在网上搜，但最近想调行距，这个把我给难住了，软件上的设置没找到，网上搜也没有，最后的最后在Sublime的官方论坛找到了，个人觉得行距还是很影响视觉体验的，看看下面的对比图就知道了:

看来想驾驭好这软件不弄清楚配置文件是不行了，周末找了时间把配置文件的每条配置信息都加上了中文注释，现在贴出来和大家共享，里面有解释不清楚的也欢迎大家伙来互相讨论:)

另外，这也是我的第一篇博客，以后我会多写些前端方面的文章和大家共享，欢迎一起讨论:)

Preferences.sublime-settings文件：

// While you can edit this file, it’s best to put your changes in

// “User/Preferences.sublime-settings”, which overrides the settings in here.

//

// Settings may also be placed in file type specific options files, for

// example, in Packages/Python/Python.sublime-settings for python files.

{

// Sets the colors used within the text area

// 主题文件的路径

“color_scheme”: “Packages/Color Scheme – Default/Monokai.tmTheme”,

// Note that the font_face and font_size are overriden in the platform

// specific settings file, for example, “Preferences (Linux).sublime-settings”.

// Because of this, setting them here will have no effect: you must set them

// in your User File Preferences.

// 设置字体和大小，必须在Settings-User里重写，这里设置没有任何效果

“font_face”: “Consolas”,

“font_size”: 12,

// Valid options are “no_bold”, “no_italic”, “no_antialias”, “gray_antialias”,

// “subpixel_antialias” and “no_round” (OS X only)

// 字体选项：no_bold不显示粗体字，no_italic不显示斜体字，no_antialias和no_antialias关闭反锯齿

// subpixel_antialias和no_round是OS X系统独有的

“font_options”: [],

// Characters that are considered to separate words

// 在文字上双击会全选当前的内容，如果里面出现以下字符，就会被截断

“word_separators”: “./\\()\”‘-:,.;<>~!@#$%^&*|+=[]{}`~?”,

// Set to false to prevent line numbers being drawn in the gutter

// 是否显示行号

“line_numbers”: true,

// Set to false to hide the gutter altogether

// 是否显示行号边栏

“gutter”: true,

// Spacing between the gutter and the text

// 行号边栏和文字的间距

“margin”: 4,

// Fold buttons are the triangles shown in the gutter to fold regions of text

// 是否显示代码折叠按钮

“fold_buttons”: true,

// Hides the fold buttons unless the mouse is over the gutter

// 不管鼠标在不在行号边栏，代码折叠按钮一直显示

“fade_fold_buttons”: true,

// Columns in which to display vertical rulers

//列显示垂直标尺，在中括号里填入数字，宽度按字符计算

“rulers”: [],

// Set to true to turn spell checking on by default

// 是否打开拼写检查

“spell_check”: false,

// The number of spaces a tab is considered equal to

// Tab键制表符宽度

“tab_size”: 4,

// Set to true to insert spaces when tab is pressed

// 设为true时，缩进和遇到Tab键时使用空格替代

“translate_tabs_to_spaces”: false,

// If translate_tabs_to_spaces is true, use_tab_stops will make tab and

// backspace insert/delete up to the next tabstop

// translate_tabs_to_spaces设置为true，Tab和Backspace的删除/插入作用于制表符宽度

// 否则作用于单个空格

“use_tab_stops”: true,

// Set to false to disable detection of tabs vs. spaces on load

// false时禁止在载入的时候检测制表符和空格

“detect_indentation”: true,

// Calculates indentation automatically when pressing enter

// 按回车时，自动与制表位对齐

“auto_indent”: true,

// Makes auto indent a little smarter, e.g., by indenting the next line

// after an if statement in C. Requires auto_indent to be enabled.

//针对C语言的

“smart_indent”: false,

// Adds whitespace up to the first open bracket when indenting. Requires

// auto_indent to be enabled.

// 需要启用auto_indent，第一次打开括号缩进时插入空格？（没测试出来效果…）

“indent_to_bracket”: true,

// Trims white space added by auto_indent when moving the caret off the

// line.

// 显示对齐的白线是否根据回车、tab等操作自动填补

“trim_automatic_white_space”: true,

// Disables horizontal scrolling if enabled.

// May be set to true, false, or “auto”, where it will be disabled for

// source code, and otherwise enabled.

// 是否自动换行，如果选auto，需要加双引号

“word_wrap”: false,

// Set to a value other than 0 to force wrapping at that column rather than the

// window width

// 设置窗口内文字区域的宽度

“wrap_width”: 0,

// Set to false to prevent word wrapped lines from being indented to the same

// level

// 防止被缩进到同一级的字换行

“indent_subsequent_lines”: true,

// Draws text centered in the window rather than left aligned

// 如果没有定义过，则文件居中显示（比如新建的文件）

“draw_centered”: false,

// Controls auto pairing of quotes, brackets etc

// 自动匹配引号，括号等

“auto_match_enabled”: true,

// Word list to use for spell checking

// 拼写检查的单词列表路径

“dictionary”: “Packages/Language – English/en_US.dic”,

// Set to true to draw a border around the visible rectangle on the minimap.

// The color of the border will be determined by the “minimapBorder” key in

// the color scheme

// 代码地图的可视区域部分是否加上边框，边框的颜色可在配色方案上加入minimapBorder键

“draw_minimap_border”: false,

// If enabled, will highlight any line with a caret

// 突出显示当前光标所在的行

“highlight_line”: false,

// Valid values are “smooth”, “phase”, “blink”, “wide” and “solid”.

// 设置光标闪动方式

“caret_style”: “smooth”,

// Set to false to disable underlining the brackets surrounding the caret

// 是否特殊显示当前光标所在的括号、代码头尾闭合标记

“match_brackets”: true,

// Set to false if you’d rather only highlight the brackets when the caret is

// next to one

// 设为false时，只有光标在括号或头尾闭合标记的两端时，match_brackets才生效

“match_brackets_content”: true,

// Set to false to not highlight square brackets. This only takes effect if

// match_brackets is true

// 是否突出显示圆括号，match_brackets为true生效

“match_brackets_square”: false,

// Set to false to not highlight curly brackets. This only takes effect if

// match_brackets is true

// 是否突出显示大括号，match_brackets为true生效

“match_brackets_braces”: false,

// Set to false to not highlight angle brackets. This only takes effect if

// match_brackets is true

// 是否突出显示尖括号，match_brackets为true生效

“match_brackets_angle”: false,

// Enable visualization of the matching tag in HTML and XML

// html和xml下突出显示光标所在标签的两端，影响HTML、XML、CSS等

“match_tags”: true,

// Highlights other occurrences of the currently selected text

// 全文突出显示和当前选中字符相同的字符

“match_selection”: true,

// Additional spacing at the top of each line, in pixels

// 设置每一行到顶部，以像素为单位的间距，效果相当于行距

“line_padding_top”: 1,

// Additional spacing at the bottom of each line, in pixels

// 设置每一行到底部，以像素为单位的间距，效果相当于行距

“line_padding_bottom”: 1,

// Set to false to disable scrolling past the end of the buffer.

// On OS X, this value is overridden in the platform specific settings, so

// you’ll need to place this line in your user settings to override it.

// 设置为false时，滚动到文本的最下方时，没有缓冲区

“scroll_past_end”: true,

// This controls what happens when pressing up or down when on the first

// or last line.

// On OS X, this value is overridden in the platform specific settings, so

// you’ll need to place this line in your user settings to override it.

// 控制向上或向下到第一行或最后一行时发生什么（没明白也没试出来）

“move_to_limit_on_up_down”: false,

// Set to “none” to turn off drawing white space, “selection” to draw only the

// white space within the selection, and “all” to draw all white space

// 按space或tab时，实际会产生白色的点（一个空格一个点）或白色的横线（tab_size设置的制表符的宽度），选中状态下才能看到

// 设置为none时，什么情况下都不显示这些点和线

// 设置为selection时，只显示选中状态下的点和线

// 设置为all时，则一直显示

“draw_white_space”: “selection”,

// Set to false to turn off the indentation guides.

// The color and width of the indent guides may be customized by editing

// the corresponding .tmTheme file, and specifying the colors “guide”,

// “activeGuide” and “stackGuide”

// 制表位的对齐白线是否显示，颜色可在主题文件里设置（guide，activeGuide，stackGuide）

“draw_indent_guides”: true,

// Controls how the indent guides are drawn, valid options are

// “draw_normal” and “draw_active”. draw_active will draw the indent

// guides containing the caret in a different color.

// 制表位的对齐白线，draw_normal为一直显示，draw_active为只显示当前光标所在的代码控制域

“indent_guide_options”: ["draw_normal"],

// Set to true to removing trailing white space on save

// 为true时，保存文件时会删除每行结束后多余的空格

“trim_trailing_white_space_on_save”: false,

// Set to true to ensure the last line of the file ends in a newline

// character when saving

// 为true时，保存文件时光标会在文件的最后向下换一行

“ensure_newline_at_eof_on_save”: false,

// Set to true to automatically save files when switching to a different file

// or application

// 切换到其它文件标签或点击其它非本软件区域，文件自动保存

“save_on_focus_lost”: false,

// The encoding to use when the encoding can’t be determined automatically.

// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.

// 编码时不能自动检测编码时，将自动检测ASCII, UTF-8 和 UTF-16

“fallback_encoding”: “Western (Windows 1252)”,

// Encoding used when saving new files, and files opened with an undefined

// encoding (e.g., plain ascii files). If a file is opened with a specific

// encoding (either detected or given explicitly), this setting will be

// ignored, and the file will be saved with the encoding it was opened

// with.

// 默认编码格式

“default_encoding”: “UTF-8″,

// Files containing null bytes are opened as hexadecimal by default

// 包含空字节的文件被打开默认为十六进制

“enable_hexadecimal_encoding”: true,

// Determines what character(s) are used to terminate each line in new files.

// Valid values are ‘system’ (whatever the OS uses), ‘windows’ (CRLF) and

// ‘unix’ (LF only).

// 每一行结束的时候用什么字符做终止符

“default_line_ending”: “system”,

// When enabled, pressing tab will insert the best matching completion.

// When disabled, tab will only trigger snippets or insert a tab.

// Shift+tab can be used to insert an explicit tab when tab_completion is

// enabled.

// 设置为enabled时，在一个字符串间按Tab将插入一个制表符

// 设置为true时，按Tab会根据前后环境进行代码自动匹配填补

“tab_completion”: true,

// Enable auto complete to be triggered automatically when typing.

// 代码提示

“auto_complete”: true,

// The maximum file size where auto complete will be automatically triggered.

// 代码提示的大小限制

“auto_complete_size_limit”: 4194304,

// The delay, in ms, before the auto complete window is shown after typing

// 代码提示延迟显示

“auto_complete_delay”: 50,

// Controls what scopes auto complete will be triggered in

// 代码提示的控制范围

“auto_complete_selector”: “source – comment”,

// Additional situations to trigger auto complete

// 触发代码提示的其他情况

“auto_complete_triggers”: [ {"selector": "text.html", "characters": "<"} ],

// By default, auto complete will commit the current completion on enter.

// This setting can be used to make it complete on tab instead.

// Completing on tab is generally a superior option, as it removes

// ambiguity between committing the completion and inserting a newline.

// 设为false时，选择提示的代码按回车或点击可以输出出来，但选择true时不会输出而是直接换行

“auto_complete_commit_on_tab”: false,

// Controls if auto complete is shown when snippet fields are active.

// Only relevant if auto_complete_commit_on_tab is true.

// auto_complete_commit_on_tab必须为true，控制代码提示的活跃度（没明白…）

“auto_complete_with_fields”: false,

// By default, shift+tab will only unindent if the selection spans

// multiple lines. When pressing shift+tab at other times, it’ll insert a

// tab character – this allows tabs to be inserted when tab_completion is

// enabled. Set this to true to make shift+tab always unindent, instead of

// inserting tabs.

// 设置为false，使用Shift + tab总是插入制表符

“shift_tab_unindent”: true,

// If true, the selected text will be copied into the find panel when it’s

// shown.

// On OS X, this value is overridden in the platform specific settings, so

// you’ll need to place this line in your user settings to override it.

// 选中的文本按Ctrl + f时，自动复制到查找面板的文本框里

“find_selected_text”: true,

//

// User Interface Settings

//

// The theme controls the look of Sublime Text’s UI (buttons, tabs, scroll bars, etc)

// Data\Packages\Theme – Default\Default.sublime-theme控制软件的主题

“theme”: “Default.sublime-theme”,

// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to

// scroll slower, or set to larger than 1 to scroll faster

// 滚动的速度

“scroll_speed”: 1.0,

// Controls side bar animation when expanding or collapsing folders

// 左边边栏文件夹动画

“tree_animation_enabled”: true,

// 标签页的关闭按钮

“show_tab_close_buttons”: true,

// OS X 10.7 only: Set to true to disable Lion style full screen support.

// Sublime Text must be restarted for this to take effect.

// 针对OS X

“use_simple_full_screen”: false,

// Valid values are “system”, “enabled” and “disabled”

// 水平垂直滚动条：system和disabled为默认显示方式，enabled为自动隐藏显示

“overlay_scroll_bars”: “system”,

//

// Application Behavior Settings

//

// Exiting the application with hot_exit enabled will cause it to close

// immediately without prompting. Unsaved modifications and open files will

// be preserved and restored when next starting.

//

// Closing a window with an associated project will also close the window

// without prompting, preserving unsaved changes in the workspace file

// alongside the project.

// 热推出功能！退出时不会提示是否保存文件，而是直接退出

// 下次打开软件时，文件保持退出前的状态，没来得及保存的内容都在，但并没有真实的写在原文件里

“hot_exit”: true,

// remember_open_files makes the application start up with the last set of

// open files. Changing this to false will have no effect if hot_exit is

// true

// 软件使用最后的设定打开文件，hot_exit为true时没有效果

“remember_open_files”: true,

// OS X only: When files are opened from finder, or by dragging onto the

// dock icon, this controls if a new window is created or not.

// 针对OS X

“open_files_in_new_window”: true,

// Set to true to close windows as soon as the last file is closed, unless

// there’s a folder open within the window. This is always enabled on OS X,

// changing it here won’t modify the behavior.

// 针对OS X

“close_windows_when_empty”: true,

// 哪些文件会被显示到边栏上

// folder_exclude_patterns and file_exclude_patterns control which files

// are listed in folders on the side bar. These can also be set on a per-

// project basis.

“folder_exclude_patterns”: [".svn", ".git", ".hg", "CVS"],

“file_exclude_patterns”: ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],

// These files will still show up in the side bar, but won’t be included in

// Goto Anything or Find in Files

“binary_file_patterns”: ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],

// List any packages to ignore here. When removing entries from this list,

// a restart may be required if the package contains plugins.

// 删除你想要忽略的插件，需要重启

“ignored_packages”: ["Vintage"]

}

(资源库 www.zyku.net)